Frequently Asked Questions

Most of the FAQ content is derived from questions asked by developers in the #quantum-sdk-v2 and #beginner-questions Discord chat. Also use the search functionality there to find more help.

Quantum Unity Framework

How can I rename the Unity project

• Step 1: Rename the quantum_unity folder to the name of your choice.
• Step 2: Edit the paths for the post-build events in quantum.code.csproj to the name selected in Step 1. The easiest way is to open the .csproj file with a text editor and run a Find-and-Replace that changes quantum_unity to the new name.

Why is the Game scene not loading when starting the game via the demo menu?

When the AppId is rejected by the server there is no proper error message, yet. Make sure you have created your AppId correctly:

1. Create a Quantum App Id on your Photon dashboard
2. Click CREATE A NEW APP
3. Set Photon Type to Photon Quantum
4. Fill out the name field
5. Scroll down and press CREATE

Why is there a 1 second delay before the Quantum game starts?

Check the Room Wait Time (seconds) in your Deterministic Config asset. There you can tweak it. The Room Wait Time is used to cope with fluctuating ping times. It will always be used in full to help sync all client sessions at start. If you set it to 1 second, it will always wait the full 1 second.

N.B.: This should NOT be used to synchronize scene loading times! If you need to coordinate this, load the scene before starting the Quantum session and coordinate through Photon Realtime directly. In this scenario, the value can be set to 0 safely.

Why is the connection timing out while trying to connect to ns.exitgames.com?

To get more details increase the connection log level Network Logging in your PhotonServerSettings. Most often, the timeout is due to your UDP traffic being blocked. For guide on how to analyze your situation, please refer to the Analyzing Disconnects page in the Photon Realtime documentation: Analyzing Disconnects

Why am I receiving unhandled event warnings from the NetworkPeer class?

Event 102 and 103.

These are clock synchronization and input messages received before Session.Join() is called. The client will receive the relevant ones again after joining the simulation.

Essentially, you are already in the room, so the running plugin session sends messages even before the local session has started.

Can I integrate my Quantum Solution into my Unity Project?

This is possible in Unity 2019.4 with Quantum 2.1 onwards.

A README with a step-by-step guide is included in the SDK in the tools\codeintegration_unity folder.

IMPORTANT: This is a one-way conversion!

How can I debug a frozen game?

Adding the QUANTUM_STALL_WATCHER_ENABLED define to Project Settings > Player > Scripting Define Symbols will enable a watcher script to spin up a thread which will watch the Update loop. If a stall is detected (i.e. the Update takes more than X seconds to be called again), it will create a crash. This is useful when debugging freezes on the simulation as the generated crash should have the call stack from all threads running.

Why can't I use the Quantum AssetRefs in edit mode?

Call UnityDB.Init() before following the AssetRef. It can safely be called multiple times; including when the game is not running. When using the Instance getter on the link it tries to retrieve the Quantum asset from the Quantum DB using the GUID stored on the link.

Is there an effective way to simulate network latency when running the game in Unity Editor?

The Quantum performance profiler has a latency simulation on board.

Download here: AddOns | Profiler

Or use an external network throttling tool for example like Clumsy (Windows) and filter out the game server ports:

• UDP 5056
• TCP 4531

Unknown

Clumsy Filter: (udp.DstPort == 5056 or udp.SrcPort == 5056) or (tcp.DstPort == 4531 or tcp.SrcPort == 4531)

Why is the game simulation running faster after pausing or debugging a breakpoint?

By default the time is measured internally and does not compensate for halting the simulation. When DeltaTimeType on the SimulationConfig is changed to EngineDeltaTime the gameplay will resume in regular speed after a pause. Caveat: Changing it will make every client use the setting which might be undesirable when only used for debugging. Although some games with very tight camera controls (e.g. flight simulation) will profit from setting it to EngineDeltaTime.

C#

public enum SimulationUpdateTime {
    Default = 0,                        // internal clock
    EngineDeltaTime = 1,                // Time.deltaTime (Unity)
    EngineUnscaledDeltaTime = 2         // Time.unscaledDeltaTime
}

Why are Navmesh islands being generated inside my geometry?

This will at some point be fixed by Unity (see forum post: forum.unity.com/threads/nav-generating-inside-non-walkable-objects)

The workaround with NavmeshModifierVolume will mitigate this (requires NavMeshComponents).

Triangle culling during the import step is another alternative which we could provide in the future.

### Why does my game gets a timeout disconnection when the Scene loading takes too long?

When loading a Unity scene, even if it is done with LoadSceneAsync, the main thread can freeze for some time accordingly to the size and complexity of such scene. This can then result in a disconnect error due to timeout as the communication doesn't happen while the game is frozen.

To prevent this from happening, you can use some of the API provided in the ConnectionHandler class. Here is a step-by-step on how to setup and use it:

• Check if there is any Game Object with the ConnectionHandler component. If there is none, please add one;

• On the component, you'll be able to see a field named KeepAliveInBackground, which you can use to increase the time that the connection will be kept. The value is informed in milliseconds;

• You should now inform what is the QuantumLoadBalancingClient, to which there is a static getter on UIMain, in case you use it (it comes by default with Quantum). Once you have done this, you can start the StartFallbackSendAckThread. Here is a sample snippet on how to achieve that:

C#

    // Before starting loading the scene
    if (_connectionHandler != null)
    {
      _connectionHandler.Client = UIMain.Client;
      _connectionHandler.StartFallbackSendAckThread();
    }

Developing A Simulation In Quantum

Why is the PhotonQuantum-Documentation.chm not readable?

After downloading the SDK zip file under Windows you need to unblock it: right-click > Properties > Check Unblock > OK

Why is the simulation starting with frame 60?

This is the number of rollback-able frames that are allocated at the start of the simulation. The number will match the value set up in DeterministicConfig->Rollback Window.

Why is Update() called multiple times with the same frame number?

Update() on systems are called multiple times for the same frame number in case of a rollback. This happens when the prediction of a remote players input was detected to be incorrect and the simulation has to re-run a frame with the correct input data to get back into a deterministic state.

How do I debug pointers in Visual Studio? I can only see the address.

• Requires Unity 2018.4 or higher, and Visual Studio 2017.
• Set Scripting Runtime Version in our Unity project to .NET 4.x Equivalent.
• Make sure you build your Quantum dlls as Debug dlls.
• Attach Visual Studio to Unity via the VS menu Debug->Attach Unity Debugger and select the correct Unity Editor instance.
• Close all instances of VS and Unity Editor, launch VS and rebuild the Quantum dlls, then start Unity and let it reload, then attach the Debugger.

How do I attach the editor to Unity (VS 2019)?

Newer Unity editors work directly with the PDBs, but they would not delete old generated MDBs. To force a change and solve the issue follow these steps:

1. Change your output debug information to Portable. (Right click on the Quantum.Code project->Open Properties->Build->Advanced)
2. Delete previous quantum dlls mdb and pdb files from unity. (Assets/Photon/Quantum/Assemblies)
3. Build your quantum project.
4. Unity should now rebuild the mdb files from portable pdb and it should work.

What's the difference between FP.MaxValue and FP.UseableMax?

The fixed point math only uses 16+16 bits of its 64-bit value. This makes part of the math faster because we don't have to check for overflows. That said: FP.MinValue and FP.MaxValue are using all 64 bits and should never be used for calculations. Use FP.UseableMax and FP.UseableMin instead (to initialize a distance variable with the min FP value for example).

N.B.: FP can represent values from -32,768 to 32,768 (-2¹⁵ to 2¹⁵).

Why does the pointer to a new struct point to stale data?

Inside the loop the pointer to the struct gets the same stack pointer and will contain stale data if neither new or default was used.

C#

struct Bar {
    public bool Foo;
}

static unsafe void Main(string[] args) {
    for (int i = 0; i < 2; i++) {

        Bar bar;
        //Bar bar = default(Bar); // <---- Fixes the stale data
       
        Bar* barPt = &bar;
        if (barPt->Foo)
            Console.WriteLine("Stuff and Things");
  
        barPt->Foo = true;
    }

    Console.ReadKey();
}

Why is my simulation desync-ing?

When DeterministicConfig.ChecksumInterval is > 0 a checksum of a verified frame is computed, sent to the server and compared with checksums that other clients have sent.

Most common causes are:

Writing to Quantum data assets

C#

c->CharacterSpec = DB.FindAsset<CharacterSpec>("WhiteFacedBarghast");
c->CharacterSpec.RemainigLifetime = 21;

Never write anything to the Quantum assets. They contain read-only data.

Writing to Quantum from Unity thread

All scripts in Unity have read-only access to everything that is exposed through the Quantum Frame. Only influence the simulation by Input and/or Commands.

Caching data

The code snippet presented below will desync eventually when the simulation is rolled-back.

C#

public class CleaningSystem : SystemBase {
    public Boolean HasShoweredToday;    // <----- Error
    public override void Update(Frame f) {
        if (!HasShoweredToday && f.Global->ElapsedTime > 100) {
            Shower();
            HasShoweredToday = true;
        }
    }
}

Instead save non-transient data on the Frame or on Entity Components.

C#

// Frame
unsafe partial class Frame {
    public Boolean HasShoweredToday;
    partial void CopyFromUser(Frame frame) {
        // Implement copy of the custom parameters.
    }
}

public class CleaningSystem : SystemBase {
    public override void Update(Frame f) {
        if (!f.HasShoweredToday && f.Global->ElapsedTime > 100) {
            Shower();
            f.HasShoweredToday = true;
        }
    }
}

For more information, read the Frames entry in the Quantum v2 Manual.

Floating point math

Refrain from using floats inside the simulation and exclusively use FP math.

Handle FP.FromFloat_UNSAFE() with care. Using it "offline" for balancing asset generation on one machine is fine; however, be aware this can return different results on different platforms. If you need to import floats during run-time and cannot use integers or FPs (e.g. downloading balancing data), convert from String to FP.

Data Created During Asset.Loaded()

Assets.Loaded() is called once per asset during loading. It is totally fine to store, calculate and store new data inside the asset members at this time - N.B.: If you are running the simulation on the server, all games will share this one asset.

If your assets are loaded from Resources and you are either restarting the Unity Editor or resetting the Unity DB at runtime, be aware that Unity does not unload the Unity asset.

C#

public partial class FooAsset : AssetBase {
  public Foo Settings;
  public int RawData;
  
  [NonSerialized]
  public List<int> Bar = new List<int>();

  public override AssetObject AssetObject => Settings;

  public override void Loaded() {
    // This will break on the second run (see above) because Bar needs to be reset by either Bar.Clear() or Bar = new List<int>()
    Bar.Add(RawData);
  }
}

Can I reuse the Photon Room for new Quantum sessions with the same clients?

No, you should not reuse the room for another Quantum session.

But you can keep the players (or a portion of them) inside the room and soft-restart the simulation. This is how Stumble Guys progresses between with the three stages.

• Keep the Quantum session running even if your game round has ended.
• Add code to your gameplay systems (e.g. a game state machine) that handles the starting of a game rounds.
• Deterministically disable Quantum systems and/or load a new Quantum map.
• Reset or destroy all Quantum entities, reset your game view.
• Players that lost a round can keep the connection to spectate the match but can't influence the game anymore.

Alternatively all players can switch the room. Because this involves server transitions and with distributed systems a lot of things can fail it is recommended to try to soft-restart the simulation and only use room transition as a last resort.

• Share the id of the new room between the clients using (e.g. Photon room properties or a Quantum command). Or create the new room programmatically/deterministically (be careful that this cannot be guessed easily).
• Every client stops the Quantum session and runs LeaveRoom() but does not disconnect.
• All clients use JoinOrCreate() to connect to the new room.
• Mitigate connection problems like clients restarting their app during the process, other connection errors, waiting for players to join, etc

Photon Realtime Matchmaking Guide

Can I use DSL generated union structs in Quantum assets?

Not directly. Unity does not support overlapping fields.

Instead <UnionName>_Prototype can be used as it is Unity-serializable and has a drawer.

To convert to a union-struct like this:

C#

UnionName result = default;
prototype.Materialize(frame, ref result, default);

Back to top