VR Escape Room

Overview

The Escape Room sample demonstrates an approach on how to develop physical interactions between players and the environment. The Core provides basic interactions and locomotion while optional modules offer additional features and interaction types as sample implementations. All modules have their own folders and can be removed if not needed. Note that the main scene provided in this sample (/Scenes/EscapeRoom Full.scene) makes use of all the modules and components and might break when deleting modules. The modules are described separately at the end of this document.

The Modules:

• Object Pull
• Instant Camera
• Whiteboard
• Observer
• Ui Module
• Slots Module
• Shooting Module

Technical Info

• This sample uses the Server/Hosted Mode topology,
• The project has been developed with Unity 2020.3.37f1,

Before you start

To run the sample :

• Create a Fusion AppId in the PhotonEngine Dashboard and paste it into the App Id Fusion field in Real Time Settings (reachable from the Fusion menu).

• Create a Voice AppId in the PhotonEngine Dashboard and paste it into the App Id Voice field in Real Time Settings

• Then load the Start scene and press Play. Then, you can either launch the complete scene or test a specific module only.

Download

Version	Release Date	Download
	1.1.3	Oct 20, 2022	Fusion VR Escape Room 1.1.3 Build 5

Handling Input

Meta Quest

• Teleport : press A or X buttons to display a pointer. You will teleport on any accepted target on release
• Touch : simply put your hand/finger over a button to toggle it
• Grab : first put your hand over the object and grab it using controller grab button
• Use : press the select button to use the grabbed objet

Please note that HTC Vive Controller and Valve Index Controller should be supported.

Desktop

Keyboard

• Walk : WASD
• Up/Down : space & left Shift

Mouse

• Rotate : keep the right mouse button pressed and move the mouse to rotate the point of view
• UI : use the left button to press an UI button
• Grab & use (3D pens) : put the mouse over the object and grab it using the left mouse button. Then you can use it using the keyboard space key

Core

The core of the sample provides physics based interactions with Rigidbodies and Articulation bodies. Rigidbodies are used for any throwable objects in the world while Articulation Bodies are used for mechanical systems like levers, dials, doors and drawers. The camera is not based on physics but only user input. Teleport locomotion is included (TeleportHandler.cs)

Interaction flow overview:

• Poll & Send Input :
  • (XRInput.cs, LocalController.cs, PCInput.cs)
• Update head and hand positions based on input using rigidbodies and forces :
  • (PlayerSystem.cs, XRObject.cs)
• Hand reads input and passes it on to HandTool and any IControllerInputReceiver :
  • (Hand.cs, IControllerInputReceiver)
• HandTool and other components react to input :
  • (HandTool.cs, TeleportHandler.cs, InstantCameraInteractable.cs)
• HandTool checks if a hotspots is in range and grabs / releases based on input :
  • (HotspotCollector.cs, Hotspot.cs, HighlightBase.cs)
• Hotspot tells InteractableBase and all IInteractable when starting / stopping an interaction :
  • (InteractableBase.cs, GrabbableBase.cs)
• GrabbableBase tracks hand position using forces :
  • (GrabbableBase.cs, GrabbableRigidbody.cs, GrabbableArticulation.cs)

Input:

Sending Input

LocalInputBase.cs

Exists independent of Fusion as a DontDestroyOnLoad object and persists between sessions. Responsible for collecting input and sending it to the Runner.

• XRInput is the main implementation of this.
• PCInput is a debug input method for quicker iteration but limited features.

Receiving Input

PlayerSystem.cs

Handles basic positioning of player objects (head and hands) via XRObject.cs. XRObject updates rigidbody forces to track the input.

Hand.cs

Reads the controller input and passes it on to anything registered to receive input via IControllerInputReceiver Explicitly passes input to HandTool.cs for basic interactions.

• Systems that want to receive input can implement IControllerInputReceiver and register with the hand (eg TeleportHandler.cs)
• Grabbed objects can temporarily register (eg InstantCameraInteractable.cs) -> Hand.AddInputBehaviour() / Hand.RemoveInputBehaviour()

Interactions

HandTool:

• Reads Input for Grab / Drop
• Uses HotspotCollector to find Hotspots and highlight them
• Grab / Drop Hotspots

HotspotCollector:

• Finds Hotspots within radius based on Layers and Tags
• Filter Order: Layer, Tag, HighlightPriority, Distance
• Highlights hotspots being hovered (HotspotCollector -> Hotspot -> HighlightBase)

Hotspot:

Represent interaction points through which HandTools can interact with objects.

• One Hand per Hotspot, if an object needs to be grabbable by more hands add more hotspots. These hotspots can be identical if need be.
• Passes Start / Stop Interaction calls to IInteractable on the same GameObject and InteractableBase in parent.

InteractableBase:

Base class for interactable objects.

• Gets Start / Stop Interaction calls

Object Hierarchy for Grabbable Object:

• Root: InteractableBase, Rigidbody, NetworkRigidbody, Highlight, NetworkObject, BodyProperties
  • Visuals
    • Highlight Visuals
  • Collision
  • Hotspot: Hotspot, GrabbableRigidbody / AttachmentRigidbody, Collider (Trigger)

BodyProperties

Assign a BodyPropertyCollection (scriptable object) to control how the object behaves when grabbed.

BodyPropertyCollection

Contains an array of BodyPropertyData which is applied to the grabbed object depending on how many hands grab the object at the time (0: not grabbed, 1: grabbed by one hand, n: grabbed by n hands). This way objects can be made unwieldy or too heavy with one hand, but easy to handle with two or more.

• BodyPropertyData:
  • Mass
  • Drag
  • AngularDrag
  • JointFrictionArticulation (only applicable for Articulation bodies)
  • UseGravity
  • OverrideInertia (if set the inertia will be set to InertiaWhenGrabbedScale * Vector3.one)
  • InertiaWhenGrabbedScale (control how much the object resists rotation changes)
  • VelocityExtrapolation (how much the current velocity is counteracted when applying the new force to the object, also used as multiplier to the force itself)
  • TorqueExtrapolation (how much the current angular velocity is counteracted when applying the new force to the object)

GrabbableBase (on Hotspot):

Handles Tracking the object to the hand position when grabbed.

Choose the appropriate implementation depending on the body type:

• GrabbableRigidbody
• GrabbableArticulation

AttachmentRigidbody (on Hotspot GameObject):

Attaches Rigidbody object to a HandTool. This is usesd for light objects that need to be very snappy. (eg Whiteboard Markers, InstantCamera Pictures, Pistol) For this to work the Object requires a certain structure:

• Root
  • Visuals
  • Collision/Logic
    • Colliders
    • Hotspot: AttachmentRigidbody, Trigger Collider,

On grabbing the Collision and Visuals GameObjects are directly attached to the Hand and act as if they are part of it.

Highlights

Visual confirmation that an interactable is in range of a hand and can be interacted with.

Value Provider / Reader

A value provider is a generic component to transfer information from one system to another and make simple logic chains without specialized components.

Example:

1. Read a value from an articulation body (ArticulationBodyValueReaderFloat.cs)
2. Compare it to a threshold (ValueLogicIntCompare.cs)
3. Use that value to drive something else (ArticulationBodyDriverSetLimits.cs)

StreamTextureManager

Required for modules. System to send texture data across the network using the OnReliableData callback. Needs to be on the same GameObject as the Runner.

IgnoreCollision

Sometimes collisions need to be ignored between certain objects using the Physics.IgnoreCollision API.

• IgnoreCollision.cs: static ignore. Does not change during gameplay. The collider on the GameObject with the script ignores all colliders in the list.
• NetworkColliderCollection.cs: Group of colliders that can be ignored.
• NetworkIgnoreCollision.cs: Use AddIgnore() and RemoveIgnore() to ignore the local colliders against all assigned NetworkColliderCollections.

Articulation Bodies

This sample makes heavy use of Articulation bodies. They are a stable way to simulate connected bodies in Unity and are used here for things like Levers, Buttons, Dials and Drawers. The implementation of the NetworkArticulationBody is not feature complete in this sample. See https://docs.unity3d.com/2020.3/Documentation/ScriptReference/ArticulationBody.html for reference

Core Components

• NetworkArticulationBodyRoot is placed on the Root
• NetworkArticulationBody is placed on all children Articulation bodies.
  • NetworkedArticulationDrive Networks the Drive properties of the Articulation body.
  • ArticulationBodyValueReaderSingleAxis Can read the value of an Articulation body to be used in the Value Provider system.
  • ArticulationBodySingleAxisSoftSnap Dynamically sets the drive property to snap to certain points. eg.: notches in a Dial, Soft-close on drawers, Fixed valid positions on Levers.

Local Interpolation

The NetworkArticulationBody inherrits from NetworkTransform and provides a stable local interpolation. For this to work as inteded the Interpolation targets need to be set and have to mirror the hierarchy of the Articulation bodies.

Structure

• Root: NetworkObject, ArticulationBody, NetworkArticulationBodyRoot, InteractableBase
  • Visuals: Follow the same Hierarchy as Articulation system.
  • Child: ArticulationBody, NetworkArticulationBody, (optional: BodyProperties* ArticulationBodySoftSnap, ArticulationBodyValueReaderSingleAxis)
    • Child: (optional, same components as above))
      • Hotspot: Hotspot, Trigger Collider, GrabbableArticulation

The BodyProperties component is required at least once below the Hotspot. Each Hotspot will search for the first in its parents.

Connecting an Articulation Body to a rigidbody

If a Articulation needs to be attached to a rigidbody it needs to be done with a Joint (eg a ConfigurableJoint).

known issues

• Don't use Compute Parent Anchor on Articulation bodies: They will be different on clients when they are not in their initial state.
• A bug in Articulation bodies results in different indices for the articulation hierarchy. We need them the same across clients to properly sync them. A temporary fix is implemented in NetworkArticulationBodyRoot.Spawned(). This reorderes them in the correct order.
  • This "hackfix" sadly disconnects any Configurable Joints between rigidbodies and articulation bodies (eg the Pistol in the shooting module). The reordering is therefore disabled for this object.

Modules

Object Pull

Pull Objects towards you by holding the grab button, pointing at the Object and flicking the hand upwards.

Requirements:

• ObjectPullCollector prefab on HandTool
• ObjectPullBody component on a Hotspot, also requireds a GrabbableBase component (GrabbableRigidbody)

---

Instant Camera

Instant camera showcasing more complex interactable objects (additional input) and the OnReliableData callbacks for sending larger data across the network.

• InstantCameraInteractable: Takes a picture by capturing the camera render-texture. Spawns a printout for that texture.
• InstantCameraPrintout: Waits for texture to arrive until it is faded in using a shader. Additionally it is resend to clients that join after the picture was initialy taken.
• InstantCameraPicture.shader: Simple Surface shader to fade-in Picture after it is received

---

Whiteboard

Whiteboard that can be drawn on.

• WhiteboardSurface: Surface to draw on. Saves its current state as a Rendertexture.
• WhiteboardMarker: Interactable. Looks through surfaces (bounds) and tells it to paint a stroke when close.

Shaders

• WhiteboardFill: Initializes the whiteboard with a given texture
• WhiteboardStroke: Draws a straight line on a rendertexture
• WhiteboardStrokeEraser: Erases in a straight line on a rendertexture

---

Observer

Mouse / Keyboard controller for observing VR players and interacting with the world.

Requirements:

• Observers use a different Input rig and Player prefab (see StartModulebutton.cs)
• Add IObserverable components to objects you want to manipulate
  • ObserverableGrabRigidbody for dragging rigidbodies
  • ObservableArticulationBodyButton adds a constant force (can be toggled)
  • ObservableArticulationBodyDrawer adds a force for a duration and keeps a bool state (flips force when pressed again)
  • ObservableArticulationBodyLever adds a force while held
  • ObservableValueProviderOverride sets the float value directly (with override toggle). Must be injected into the logic chain to have an effect.

Floating UI windows are automatically created for all IObserverable components using CreateObserverUi(). Custom UI can be implemented here. Default components are defined in UI_ObserverItem prefab.

Observer Input

Manipulation of observable objects is send directly as Input. (see ObserverInput / ObserverInputHandler.cs) Input consists of :

• NetworkBehaviourId to identify the component being modified.
• Value (currently only float, bool and Vector3)

---

UI Module

Basic networked Cursors and UI Interactions. It uses Unity's 'Tracked Device Raycaster' and 'InputSystem UI Input Module' to register Canvas interactions locally and send it as Input. For use with the PC Rig the 'Graphics Raycaster' also needs to be present.

• LocalController.OnInputUi()

  • Saves Canvas being pointed at to InputDataController.CanvasBehaviour (NetworkBehaviourId)
  • Saves World position of pointer colliding with Canvas to InputDataController.CursorPosition
  • If the pointer hits a GameObject with a NetworkedUiButton component, it is saved to InputDataController.UiInteractionBehaviour (NetworkBehaviourId)

• UiPointerHandler

  • reads the input and sends the pointer position and interaction on to the corresponding NetworkedCanvas and NetworkedUiButton

---

Slots Module

The slottable system is used to guide objects smoothly into predetermined positions / orientations. Think: Plugs, Keys, Puzzle pieces, Magazines, etc. To achieve this the GrabbableBase.cs has various `elegates and callbacks to override the target position the object wants to reach while grabbed.

• RotationDelegate GetRotationMethod
• GrabAndTargetPositionDelegate GetGrabAndTargetPositionMethod
• UnityAction PreTrackCallback
• UnityAction PostTrackCallback

Slottable

The Slottable component overrides these callbacks and changes the desired position and rotation depending on the current targets in relation to the Slot.

• PreTrack: Check if close enough to a slot be be affected and calculate two factors for later use

  • _slotFactorHand: Distance from the hand to the slot. This is used to determine the target position and rotation the object should assume.
  • _slotFactorObject: Distance from the object to the slot. This is used to determine if the object is slotted and should be released, if the object can still be rotated (>RotationLockThreshold)

• PostTrack: Check if the object should be dropped.

The Object Factor is the actual position of the object while the hand factor is determined from the input position of the hand before any forces are applied.

The Slottable gets the desired position / rotation form the Slot depending on _slotFactorHand and _slotFactorObject.

Additional Components:

• GrabbableRidgidbody
• HotspotCollector to find valid Slots.
• (optional) NetworkColliderCollection: Assign colliders being ignored when near a Slot (is ignored against colliders set in the slot and hands interacting with hotspots if set)

Slot

The Slot component contains the data on how the Object should behave when in range. Curves determine how sudden the position / rotation changes from the object position to the desired slot position. Needs at least one collider marked as trigger with the correct Layer to be picked up by the Slottables HotspotCollector.

HotspotsToIgnoreHandCollisionWhenGrabbed can be used to ignore hands grabbing the hotspots. This is usefull when space is tight and you want to ignore the hand grabbing the Slot. Example: One hand is holding a pistol, the magazine and the slot for it are very close to the hand so the magazine would under normal circumstances collide with the hand. Add the hotspot of the handle here to ignore the hand collision as well. UseLineForRange can be set to use a line segment as the slottable target instead of a point.

DropType determines how an object is handles when it is successfully slotted.

• Kinematic: used for objects getting slotted into static level geometry. Objects get turned kinematic and can't be moved unless grabbed again.
• Destroy: object gets despawned
• (TeleportOffsite: not tested well, could be used for objects getting slotted on rigidbodies so they can be repositioned instantly when grabbed again. will need some magic on the receiving end to render the slottable in place.)

Slots determine if the Slottable can be slotted by checking various parameters:

• SlotType matches the Slot
• no other Slottable is already present (or if AllowMultipleObjects is set)
• more restrictions could be added in (Slot.CanSlot())

Components:

• NetworkIgnoreCollision (optional): The colliders assigned can be ignored for the slotted object. This can be used to enable the Slottable to go through the wall while the hand itself or other objects not fitting the slot can not.

---

Shooting Module

Sample implementation of how to do gun-like interactables. Two examples are provided.

• Shotgun

  • Multiple bullets at once
  • Heavier physics body using GrabbableRigidbody
  • Reloading single shells

• Pistol

  • Manual cocking using articulation bodies
  • Reloading full magazine
  • Grabbing using AttachmentRigidbody

---

Good to know

Scene Setup

The Connector.cs and LocalRigSpawner.cs are present in every scene. If no local rig is spawned or pre-defined in the scene it will spawn one (either xr or pc) and create a runner and connect. For the Start.scene the runner starts in SinglePlayer mode. This way we have full access to our game code without extra work.

Hand and Object visual interpolation :

Under different circumstances the regular interpolation of the NetworkRigidobdy is overwritten in Render()

• If the hand is not grabbing or colliding with anything, the Local controller position is set. This avoids any delay that occurs when moving the hand object using forces (XRObject.cs, UpdateRender()).
• If the hand is grabbing an object, the object comes the defacto authority for the visual hand position. The hand is placed relative to the grabbed object, taking the initial offset when the interaction started into account (GrabbableBase.cs Render()).
• If the object is released the visual hand is lerped back to actual position (HandTool.cs Render())

Common issues

• My grabbable object is flying all over the place / rotating weirdly : Check the following settings to make sure forces don't build up or oscillate. They are tweakable in the editor while playing.

• BodyProperties : each grabbable object has a BodyProperties component where physics properties are set and synced. The properties themselves are scriptable objects and can be reused across similar objects. Tweak the values to get the weight and feel you want the object to have. When objects get out of control it can either be the position or rotational component oscillating. Within the GrabbableBase component you can toggle if you want to track Position and/or rotation to find out what causes the issue and tweak accordingly.

  • Position: Mass, Drag, UseGravityk, Velocity Extrapolation
  • Rotation: Mass, Angular Drag, Interia, Torque Extrapolation

• GrabbableRidgidbody, "Set Center Of Mass To Grab Point" : In the Grabbable Rigidbody component you toggle if the center of mass is set to the grab point when grabbing. This has a big influence on the rotational characteristics of an object and might require different BodyProperties. If similar objects with the same BodyProperties behave differently, this might be the culprit.

Back to top